Products name:

PES Cartridge Filters

Constructed of rugged, Hydrophilic asymmetric Polyethersulfone pleated membranes with virgin polypropylene supports to enhance durability and cleanliness
Injection Grade, pharmaceutical Grade, Food Grade, Electron-grade
Connections :2-222 O-rings, 2-226 O-rings, with spear, with flat ,DOE, SOE, etc.
Available in filter ratings: from 0.1um to 1.2um
Cartridge Lengths: from 1 inch to 40 inch
With high retention efficiency, high flow rate, and long product life, it contributes to better cost performance.
The filters are available in a wide range of retention ratings to match the specific purity

Category

规格参数



Advantages and features

Parameters

Specifications

Information

Provides excellent particle retention in ratings that match your specific process and flow requirements.

Eliminates chemical usage while reducing system downtime during filter changeouts. Saves time, greatly increases equipment uptime.

The filters are desiged to withstand 100 psi differential pressure at 25° C in the forward direction and 75 psi differential pressure at 25° C in the reverse direction.

Provides excellent small particle retention for a variety of particle sizes.

High retention rating: >99.999% at stated retention rating.

Requires less space for changeout. Minimizes downtime and simplifies changeout.

Clean, economical solution designed to match the needs of use filtration of Pharmaceutical reagent and pure water.

Option: Design incorporates no O-rings to avoid potential sources of contamination.

We could not find any corresponding parameters, please add them to the properties table

Injection Grade, pharmaceutical Grade, Food Grade, Electron-grade

Connections :2-222 O-rings, 2-226 O-rings, with spear, with flat ,DOE, SOE, etc.

Available in filter ratings: from 0.1um to 1.2um

Cartridge Lengths: from 1 inch to 40 inch

With high retention efficiency, high flow rate, and long product life, it contributes to better cost performance.

The filters are available in a wide range of retention ratings to match the specific purity and flow requirements of your process, and to further reduce maintenance as less frequent filter changeout is required.

With a wide variety of configurations, PES cartridge filters can be used in a wide variety of process chemicals in either bulk or point of use applications.

Reduces particle contamination with superior downstream cleanliness. Durable construction ensures longer filter life when matched with appropriate retention ratings for your application.

Materials	Filter Membranes: Hydrophilic asymmetric Polyethersulfone, Pleated
	Supports, core and sleeve: Pure Virgin Polypropylene
	O-rings: silicon, EPR , Teflon® fluoropolymer encapsulated Viton® fluoroelastomer O-ring (TEV), Nitrile, Viton®, No O-ring Required
Connections	2-222 O-rings, 2-226 O-rings, with spear, with flat ,DOE, SOE, etc.
Operating Conditions	Maximum Forward/ Reverse Differential Pressure: 0.1 and 0.2 µm: 0.103 MPa @ 70°C / 15 psid @ 158°F
	Maximum Operating Temperature: 80° C
Membrane Area For example	10-inch: 7,000 cm2 (7.54 ft2) 20-inch: 14,000 cm2 (15.1 ft2) 30-inch: 21,000 cm2 (22.6 ft2)
Cartridge Lengths For example:	222/Flat: 10-inch: 260 mm [10.24”] 20-inch: 506 mm [19.91”] 30-inch: 751 mm [29.56”] 226/Spear: 10-inch: 305 mm [12.87”] 20-inch: 573 mm [22.54”] 30-inch: 799 mm [31.44”] 226/Spear: 10-inch: 312mm [12.32”] 20-inch: 559 mm [22.00”] 30-inch: 804 mm [31.66”]